Geomembrane

Nowadays, different types of synthetic rubber materials have become an important industrial product. It is made of original geomembrane rubber and used as a coating material in potable water pools.

Get A Free Quote
Name (*)

E-Mail (*)

Telephone (*)

Subject(*)

Message


These materials become soft and flexible when heated, but do not change their inner properties, and then return to their original characteristics when they are cooled.

Geomembranes are mainly used to ensure impermeability. Impermeability in field applications is also due to geomembranes.

The use of geomembranes in environmental, geotechnical, hydraulic and transportation fields;

  • As coating material for potable water,
  • As coating material for water tanks,
  • As coating material for liquid wastes,
  • As coating material for radioactive and hazardous liquid wastes,
  • As secondary coating material for underground storage tanks,
  • As coating material for salt water solutions,
  • As coating material for water channels,
  • As coating material for various waste water channels,
  • As coating material for solid waste sites,
  • In order to prevent leakage within the zoned embankment dams,
  • In coating of hazardous filled channels
  • To ensure impermeability within the tunnels,
  • To ensure impermeability of rockfill dams
  • To ensure impermeability of masonry dams,
  • Batardoların içinde sızdırmazlığın kontrolünde,
  • In the control of the leak inside the bumpers,
  • Prevention of odor from fills,
  • As a barrier against vapor under buildings,
  • In control of swelling floors,
  • In the control of frozen delicate grounds,
  • In order to prevent water leakage in sensitive areas,
  • Keeping of harmful liquid wastes that may occur under and near the motorways,
  • As coating element for temporary surcharges,
  • As a sealing layer under asphalt pavement coatings,
  • In order to ensure sealing in the above ground storages.

GUTCR (Reinforced) – GUTC (Unreinforced) UV Protected

Product NoMB7241 – MB7242 – MB7244 DONATISIZ
MB7246 – MB7247 – MB 7249 DONATILI
DESCRIPTIONGUTC – GUTCR – PVC MEMBRANE IN
ACCORDINCE WITH TS EN 13361 / TS EN 13362
CE NO : 1301 – CPD – 0521
PRODUCTTHICKNESS
mm.
WIDTH
Metre
LENGTH
Metre
kg/m2
MB7241
MB7246
1.202.05201.52
1.202.05201.60
MB7242
MB7246
1.502.05201.90
1.502.05201.90
MB7244
MB7249
2.002.05202.54
2.002.05202.84

Application Areas:

  • Underground or Surface application will be made,
  • All kinds of Pond works (Decorative Ponds – Fish and Garden Ponds)
  • Dam / Canal / Canalette

Important Information: PVC Membranes should not be contacted directly with Bitum products due to their chemical structure. If the application is difficult, the separating layer Geotextil Felt should be used.

UTCR (Reinforced) UV PROTECTED, POLYESTER REINFORCED ROOF MEMBRANE

PRODUCT NOMB7231 – MB7232 – MB7234
DESCRIPTIONUTCR PVC MEMBRANE IN ACCORDINCE
WITH TS EN 13956
CE NO : 1301 – CPD – 0425
PRODUCTMB7231MB7232MB7234
THICKNESS
mm.
1.201.502.00
WIDTH
Metre
2.052.052.05
LENGTH
Metre
202020
kg/m21.602.012.84

It is developed for roofs exposed to harsh weather conditions and sunlight (U.V.). Suitable for hot air supply and mechanical joints. It has high dimensional stability and high tear resistance due to its polyester reinforcement. Provides excellent insulation between -30 ° C and + 85 ° C.

Application Areas:

  • All kinds of concrete and steel roofs
  • (U.V. recommended, heat insulated and non-insulated)
  • Parapets (U.V. recommended)
  • Hidden divisions

Important Information: PVC Membranes should not be contacted directly with Bitum products due to their chemical structure. If the application is difficult, the separating layer Geotextil Felt should be used.

WTC 0,0 DRINKING WATER TANK PVC WATER INSULATION MEMBRANE

PRODUCT NOMB7273 – MB7270 – MB7272
DESCRIPTIONWTC PVC MEMBRANE IN ACCORDINCE
WITH TS EN 13361 / TS EN 13362
CE NO : 1301 – CPD – 0521

PVC waterproofing membranes, specially developed for drinking and tap water tanks, do not contain HEAVY METAL and PHTHALATE. Membrane, which is produced as multi-layered, has Ministry of Agriculture and Rural Affairs food regulations and international acridite laboratory certificates of conformity. It is applied with the combination of hot air supply. The lower and upper layers are produced in standard blue color during manufacturing. Manufacturing can be made in the desired colors upon request. PVC waterproofing membranes provide excellent insulation between -30 ° C and + 85 ° C.

TTC YELLOW SIGNAL LAYERED WATER INSULATION PVC MEMBRAN

PRODUCTS NOMB7201 – MB7202 – MB7204
DESCRIPTIONTTC 0,0 – PVC MEMBRANE
PRODUCT
STANDARD
EN 13967 / TS EN 13491
CE NO: 1301—CPD-0426
CE NO: 1301—CPD-0632
PRODUCTTHICKNESS
mm.
WIDTH
meter
HEIGHT
meter
kg/m2
MB72011.202.10201.50
1.502.10201.95
MB72022.002.10202.74
2.502.10203.40

Manufactured in 1.00 – 1.50 – 1.80 – 2.00 – 2.50 mm thicknesses and multi layered laminated membranes. The assembly is manufactured on the longitudinal and horizontal guide lines for ease of application. The bottom layer is black, the top signal layer is yellow as standard. According to the application detail size produced in the project, the product can be made in any size.
Provides excellent insulation between -30 ° C and +85 ° C.

Application Areas:
Underground or above ground application,

  • Building fundation & curtain
  • Highway tunnels
  • Reinforced concrete roofs (without U.V.)
  • Ballasted roofs
  • Metro structures
  • Underground galleries
  • Hangars
  • Wet areas
  • Building dilatation systems

Important Information: PVC Membranes should not be contacted directly with Bitum products due to their chemical structure. If the application is difficult, the separating layer Geotextil Felt should be used.

UTCR (Reinforced) UV PROTECTED, POLYESTER REINFORCED ROOF MEMBRANE

PRODUCT NOMB7281 – MB7282 – MB7283
DESCRIPTIONUTCRK – PVC MEMBRANE IN
ACCORDINCE WITH TSE EN 13956
CE NO: 1301—CPD-0425
PRODUCTTHICKNESS
mm.
WIDTH
meter
LENGTH
meter
kg/m2
UTCRK1.201.10201.65
UTCRK1.501.10202.10
UTCRK2.001.10202.95

It has been developed for all kinds of roofs, hidden streams and sandwich panels (laminated felt to provide ease of application) exposed to weather conditions and sunlight (U.V.) It has excellent vapor permeability. It provides excellent insulation between -30 ° C and +85 ° C, suitable for hot air supply and mechanical joints. It has high dimensional stability and high tear resistance due to its polyester reinforcement + felt lamination.